Highest quality standards are achieved through the implementations of latest technology, decades of experience and everlasting moral values , which have helped us to retain our customers as well as multiply them.
Product description
Tejastipper-077 is a liquid paint stripper, specially formulated to remove epoxy, melamine, acrylic, polyesters and enamel paints, from ferrous metals. Wax seal of Tejastipper-077 is used only at room temperature, which substantially saves the heating cost effectively and economically removes many types of paint finishes.
Product Specifications
Colour
Brown colour liquid
Odour
Sweet
Foaming Tendency
Nil
Reliability
Good
Handling
Avoid Skin Contact
Solubility
Good
pH
6 - 7
Toxicity
Moderate
Flash Point
Nil
Pollution Hazard
Treatable
Product Operating Data
Concentration
100%
Temperature
R.T.
Dip Time
15 – 30 minutes
Product Operating Procedure
Put Tejastipper-077 as supplied (concentration) to the processing tank. Dip the components in Tejastipper-077 tank at room temperature till the coating is completely removed. Take out the components and rinse with jet of water to flush off any residual film or coating. Normally the dipping time is about 15 to 30 minutes, depending upon the type and number of coatings to be stripped off.
Product Application Equipment's
Polyplastic Tank
Testing and Control Procedure
No testing is required.
Chemical Replenishment
Discard the bath when its paint removing action slows and makes it fresh.
Safety Measures
Tejastipper-077 is based upon chlorinated base and mixture of various solvents and complex organic chemicals. It is harmful if swallowed and inhalation or direct contact causes burns of eyes and skin. Avoid prolonged breathing of vapours, always use of gloves, aprons, boots, eye shields during the stripping and handling.
General Information
The information on this technical data sheet is based on our skill, experience and test, which we believe to be reliable but Teja metallurgicals and chemicals offers no guarantee and cannot accept responsibility for operations not under their direct control.
* To embrace new technologies and methods. * To give unsurpassed products and services to the clients. * To constantly look for improvement and changes.